Category
Application
System of Measurements
American (Imperial) European (Metrical)
Sorry, we didn't found any product matching your request. Sorry these products are only available for the EU market. Try browsing our EU catalogue for more info.
ALPHA MICROWAX 66
White microcrystalline wax, high in isoparaffins and very flexible. A specialty product ideal for high end cosmetic applications, pharmaceutical sector, depilatory wax, petroleum jelly and casting waxes.
Congealing point
Drop melting point
Kinematic viscosity
Penetration
64 - 71 °C
71 - 76 °C
at 100 °C 11-15 mm²/s
25-40 dmm
ALPHA MICROWAX 70
White microcrystalline wax, low melting point. Thanks to its good oil and fragrance binding properties, it is ideal to be used for candles and petroleum jelly.
Congealing point
Kinematic viscosity
Penetration
64 - 71 °C
at 100 °C 12-19 mm²/s
25-40 dmm
ALPHA MICROWAX 75
White microcrystalline Wax, medium melting point. It features very good oil binding properties. Ideal for food packaging, chewing gum and petroleum jelly.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
72 - 78 °C
at 100 °C 12-20 mm²/s
20-30 dmm
max. 1,5%
ALPHA MICROWAX 86
High quality white microcrystalline wax with high content of isoparaffins. Thanks to its very good binding properties it's ideal for food applications such as cheese coating and chewing gum, packaging and hot melt adhesives.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
84 - 88 °C
at 100 °C min. 11 mm²/s
max. 18 dmm
max 1,0%
ALPHA MICROWAX MMP
High quality white microcrystalline wax featuring high viscosity. It has very good oil binding properties and is ideal to be used in packaging, hot melts, and textile applications.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
71 - 75 °C
at 100 °C 12-17 mm²/s
max. 25 dmm
1,5%
ALPHA SLACKWAX LMO
Medium viscosity slack wax with a high flash point. It is very suitable for the OSB, fertilizer coating, anti dust, anti corrosion applications as well as for religious candles.
Congealing point
Kinematic viscosity
Max Oil Content
52 - 62 °C
at 100 °C 5,2-6,4 mm²/s
28%
ALPHA SLACKWAX SPO
Low melting point and viscosity slack wax. Ivory in color, it is very suitable for religious candles, tea light, fertilizer coating, dust binding, rubber applications, OSB as well as wax emulsions.
Congealing point
Kinematic viscosity
Max Oil Content
45 - 55 °C
at 100 °C 3,0-4,0 mm²/s
20%
CANDELILLA WAX
Derives from the plant Euphorbia cerifera and has a transparent yellow color. Its hard, shiny and has a very good capacity to retain essential oils therefore preserving flavors. Ideal for use in cosmetics applications, food as well as electronics industry. FDA approved.
CARISMA 2024
Very soft, pure Alpha Olefin wax from ethylene. Ideal for use as a blending component for candles as well as in fertilizing coating.
Kinematic viscosity
at 40 °C 6.4 mm²/s
CARISMA 54T
Specialty blend of paraffin wax with a low molting point. It is ideal for moulded and pressed candles, tealights as well as cosmetic applications.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
54 - 56 °C
at 100 °C 3,0-4,0 mm²/s
12-18 dmm
0,5%
CARISMA 56
Specialty blend of fully paraffin wax, ideal for moulded and pressed candles, tealights.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
56 - 58 °C
at 100 °C 3,5-4,5 mm²/s
12-17 dmm
0,5%
CARISMA 56 FLEX
Specialty blend of paraffin wax, ideal for extruded candles.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
56 - 58 °C
at 100 °C 3,7-4,7 mm²/s
12-18 dmm
0,5%
CARISMA 56 SUPERFLEX
Specialty blend of Paraffin Wax, ideal for candle drawing and all wax applications requiring flexibility of its wax component.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
56 - 58 °C
at 100 °C 3,8-4,8 mm²/s
15-20 dmm
0,5%
CARISMA 57
Specialty blend of paraffin wax, ideal for moulded and pressed candles.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
55 - 59 °C
at 100 °C 3,5-4,5 mm²/s
12-18 dmm
1,0%
CARISMA 57 FLEX
Very flexible specialty blend of paraffin wax, specifically designed for candle extrusion.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
55 - 59 °C
at 100 °C 3,7-4,7 mm²/s
15-22 dmm
1,0%
CARISMA 57 SUPERFLEX
Extremely flexible specialty blend of paraffin specifically designed to produced extruded candles or drawing candles. It features higher viscosity.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
55 - 59 °C
at 100 °C 3,7-4,7 mm²/s
16-23 dmm
1,0%
CARISMA 59
High melting point, hard paraffin wax. This is a specialty blend designed for moulded and pressed candles. It os also ver suitable for the production of hot melt adhesives, PVC, paper coating and packaging.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
58 - 61 °C
at 100 °C 3,5-4,5 mm²/s
12-18 dmm
0,5%
CARISMA 62
Paraffin wax with a very linear structure that aids with the extrusion of pipes. It is ideal for the production of Hot-melt Adhesives, PVC, paper coating and packaging. It features a lower melting point compared to Carisma 64.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
60 - 62 °C
at 100 °C 3,9-4,9 mm²/s
12-16 dmm
0,5%
CARISMA 64
High melt paraffin wax with a very linear structure that aids with the extrusion of pipes. It is ideal for the production of hot melt adhesives, PVC, paper coating and packaging.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
64 - 66 °C
at 100 °C 4,5-5,6 mm²/s
12-15 dmm
0,5%
CARISMA AO 26+
High melting point, high viscosity blend of synthetic wax and Alpha Olefin wax. It is a hard, very linear molecule with very good binding properties. Ideal for candles, fertilizer coating, blending component, PVC and hot melt adhesives.
Congealing point
Kinematic viscosity
Penetration
57 - 60 °C
at 100 °C 4,0-5,0 mm²/s
11-15 dmm
CARISMA JAR - T16
Fully synthetic specialty blend of paraffin wax, white in color with good burning and color adhesion properties. This one pour wax is ideal for jar/glass filled candles.
Congealing point
Kinematic viscosity
Penetration
51 - 54 °C
at 100 °C 3,5-4,5 mm²/s
65-90 dmm
COCONUT WAX
A fatty substance that contains about 90% saturated acids extracted by pressing the pulp or meat of coconuts (Cocos nucifera). An important ingredient for making soap, is also ideal for use in candles, food and cosmetics. Excellent in preventing oxidation. FDA approved.
FENIX PROCESS OIL 100
Highly refined process oil based on Group II technology. It is mainly used in cosmetics and Pharma, petroleum jelly, textiles, hot melt adhesives as well as rubber compounding.
Kinematic viscosity
at 20 °C 48 mm²/s
FENIX PROCESS OIL 220
Highly refined process oil based on Group II technology. It is mainly used in cosmetics and Pharma, petroleum jelly, textiles, hot melt adhesives as well as rubber compounding.
Kinematic viscosity
at 20 °C 112 mm²/s
FENIX PROCESS OIL 2500
Aromatic process oil, type RAE (residual aromatic extract). Ideal as an extender oil in the manufacturing of industrial rubber, tyres and in black printing ink formulations. Low toxicity level.
Kinematic viscosity
at 100 °C 45-70 mm²/s
FENIX PROCESS OIL 600
Highly refined process oil based on Group II technology. It is mainly used in cosmetics and Pharma, petroleum jelly, textiles, hot melt adhesives as well as rubber compounding.
Kinematic viscosity
at 20 °C 394 mm²/s
JARISMA 1218
Natural based specialty wax blend, with good burning and color adhesion properties. It is designed for jar filled candles.
Congealing point
Kinematic viscosity
Penetration
47 - 53 °C
at 100 °C 4,0-6,0 mm²/s
45-75 dmm
NON-GMO SOY WAX
A blend of coconut, paraffin, and other non genetically modified natural waxes that create a single pour, moderately soft container wax with minimum contraction and good adhesion to container surfaces. This product has a medium melt point, bright white color, and has retention characteristic for various fragrance loads. Recommended pouring temperature is appx. 65°C. This product is packaged in slab form.
Drop melting point
Penetration
54 - 60 °C
50-90 dmm
ORGANIC BEESWAX (Y, W)
A precious animal secretion either ivory (Cera alba) or yellowish in color (Cera flava). Beeswax has a melting point of 62-65°C (143.6-149 °F) and is ideal as a thicken agent for natural cosmetics and as a stabilizer for emulsions. It is also used as a quality ingredient in depilatory waxes. FDA approved and certified organic. We ship in tablets, flakes or blocks. Available in white and yellow color.
Drop melting point
62 - 65 °C
ORGANIC CARNAUBA (T1, T3,)
It derives from the leaves of the Copernicia prunifera palm native to Brazil. Carnauba wax T1 and T3 combines hardness with wear resistance and has the highest melting point among natural waxes (78 to 85°C/172.4 to 185 °F). Due to its shine properties is ideal for use in food applications and coatings, cosmetics as well as waxes for floors and automobiles. FDA approved and certified organic. Available in white and yellow color.
Drop melting point
78 - 85 °C
POMONA 130P
Paraffin Wax, ideal for all candle types. It is also an excellent product for achieving mottling effect.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
54 - 56 °C
at 100 °C 3.5
12-15
5%
SOY WAX
A single pour wax in containers with excellent fragrance retention and good cold/hot throw characteristics. When wicked correctly, there is significantly less sooting of the container walls. Product is available in slab form.
Congealing point
Drop melting point
Viscosity
40.5 - 49 °C
48 - 53 °C
at 100 °C 12 Max cP
Shell Sarawax GTL SX50
Synthetic Paraffin Wax, ideal for Tea Lights, Grave Lights and as blending component for Candles and Wax emulsions.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
52 - 56 °C
at 100 °C 3,0-3,6 mm²/s
22-40 dmm
2,8%
Shell Sarawax GTL SX70
Synthetic paraffin wax produced with the Fischer-Tropsch process. It is a high melting point, hard, very narrow cut molecule used in hot melt adhesives, PVC, lubes, printing inks. Ideal in applications where high gloss is desirable.
Congealing point
Kinematic viscosity
Penetration
Max Oil Content
68 - 72 °C
at 100 °C 5,0-8,0 mm²/s
9-16 dmm
0,5%
TRECORA L-CRYSTA P7200 - POLYMER ADDITIVE FOR CANDLES
A specialty polymer that improves structure, hardness, strength, color dispersion, and fragrance retention in candles. Can replace stearic acid. Typical concentrations of L-Crysta amount to 0,25 - 1% by weight.
Drop melting point
Viscosity
74 - 78 °C
at 100 °C 160-360 cP
TRECORA OXIDIZED POLYETHYLENE WAX - OX18
Oxidized High Density Polyethylene Waxes are used in applications where compatibility with polar systems are required, such as PVC extrusion and industrial coatings. Also available in a coarse powder.
Softening point
Viscosity
Penetration
95 - 110 °C
at 149 °C max. 30 cP
max. 12 dmm
TRECORA OXIDIZED POLYETHYLENE WAX - OX7
Oxidized High Density Polyethylene Wax used in applications where compatibility with polar systems are required, such as PVC extrusion and industrial coatings.
Softening point
Viscosity
Penetration
102 - 114 °C
at 149 °C max. 30 cP
max. 5 dmm
TRECORA POLYETHYLENE WAX - CHU561
High Density Polyethylene Wax used in hot melt adhesives to reduce viscosity and control open and set time.
Softening point
Viscosity
Penetration
107 - 118 °C
at 149 °C max. 55 cP
max. 9 dmm
TRECORA POLYETHYLENE WAX - CHU610
High Density Polyethylene Wax used in applications where a higher viscosity is desirable. Compared to other low density PE waxes, its viscosity is still low.
Softening point
Viscosity
Penetration
113 - 121 °C
at 149 °C 55-300 cP
max. 9 dmm
TRECORA POLYETHYLENE WAX - CWP400
High Density Polyethylene Wax used in the packaging industry where heat stability and heat resistance are required. It will also reduce the viscosity of the finished blend. Can be used in inks and coatings to provide rub resistance.
Softening point
Viscosity
Penetration
110 - 118 °C
at 149 °C max. 50 cP
max. 2 dmm
TRECORA POLYETHYLENE WAX - CWP400 E
High Density Polyethylene Wax used in hot melt adhesives to reduce viscosity and control open and set times. It functions as an external lubricant in PVC processing to reduce torque in an extruder, specifically during production of PVC pipe. Also available in a coarse powder form.
Softening point
Viscosity
Penetration
110 - 118 °C
at 149 °C max. 50 cP
max. 3 dmm
TRECORA POLYETHYLENE WAX - CWP500
High Density Polyethylene Wax used in hot melt adhesives to reduce viscosity and control open and set time.
Softening point
Viscosity
Penetration
107 - 116 °C
at 149 °C max. 50 cP
max. 8 dmm
TRECORA POLYETHYLENE WAX - CWP500 E
High Density Polyethylene Wax ideal for use in hot melt adhesive applications to reduce viscosity and control open and set times.
Softening point
Viscosity
Penetration
107 - 116 °C
at 149 °C max. 50 cP
max. 8 dmm
TRECORA POLYETHYLENE WAX - TRECOR HMA-1
High Density Polyethylene Wax with a narrow molecular weight distribution. Ideal for use in Hot melt adhesives to provide heat resistance, reduce viscosity and control open and set time.
Softening point
Viscosity
Penetration
113 - 121 °C
at 149 °C max. 50 cP
max. 2 dmm
SX105
Specialty wax produced by the GTL process with high linearity and narrow carbon number distribution. Because of its very high quality and unique white color, this wax is very suitable for a wide range of specialty applications such as Hotmelt Adhesives, PVC lubrification, Printing inks, rubber and tire and personal care.
Congealing point
Kinematic viscosity
Penetration
101 - 108 °C
at 130 °C 25 mm²/s max
at 65°C 12dmm max